Hoof Rasp Final Inspection and Packing

Relia performs final inspection of steel hoof rasps in-house. For your order, tie the checks to the accepted sample, drawing and variant. Specify the body measurements, both tooth fields, fitted grip where applicable, and any carton or inspection records needed by the receiving team.

Reference
Approved drawing and sample
Finished checks
Body, tooth fields and fitted grip
Shipping records
Carton mark and identified units

The Order Sets the Final Inspection Criteria

Agree the item, measuring station and required evidence so receiving can repeat the checks that matter.

Purchase referenceWhat to verify
Body dimensionsMark the station on the drawing for actual length, width and thickness. Compare the body envelope and tooth field as separate measurements.
Working facesIdentify the required coarse and fine faces. Use photographs from the same orientation to check field limits, visible tooth pattern and finished condition.
Grip or bare tangName the supplied configuration and check the accepted fit reference. For a handled model, confirm seating and the working clearance you agreed.
Additional testsList hardness or cutting checks, any requested sample size and the record format your order needs. Agree the method and actual criteria in writing.

Checking a Handled Rasp Against a Named Sample

The KD939A listing offers size options including 14 and 16 inches with a rubber grip. Keep the size and grip reference together on the order, then check the same assembly at receiving.

KD939A 14-Inch Double-Sided Horse Hoof Rasp with Rubber Grip
Catalogue photograph of the KD939A hoof rasp with rubber grip.

From Approved Sample to Release Review

Keep the evidence that ties together the accepted sample and the shipment.

  1. Confirm the reference

    Record the quote line, model, approved drawing or sample revision and the carton marks needed at the destination.

  2. Review the agreed checks

    Record any order-specific dimensions, appearance checks and required report format against the same reference.

  3. Close any difference

    Describe the measured difference with pictures or the relevant reading. Record the agreed decision with the order before stock is released.

Packing Buyers Can Identify at Receiving

Specify unit protection and carton identity with the approved model and grip.

  • Working-face protection

    Choose the pack that keeps the two toothed faces protected from contact in transit. Confirm which sleeve, wrap or retail box is requested.

  • Unit and carton labels

    Keep the SKU, length, cut and pack count readable. Agree any barcode, retail art or carton marking before approval.

  • Mixed shipments

    List each configuration and quantity independently and identify pack patterns that the receiving team should expect.

A Receiving Record That Can Be Repeated

Use a single record to link the items received to the accepted model and agreed check.

Reference fields
Purchase order, model or SKU, size, face pattern, drawing revision and sample reference.
Identification fields
Carton mark, date or lot reference if supplied, expected count and received count.
Measurement fields
Marked position, expected specification, observed reading and photos of the relevant face or grip.

Before You Release a Bulk Order

Capture the parties' approval criteria in the quotation or the approved drawing package.

  • Confirm both sides

    Include which surface shapes and which finishes on models with two cuts.

  • Choose required evidence

    State the checks and any paperwork that determine receiving acceptance.

  • Confirm packing

    Identify unit protection, outer carton markings and quantity by model.

Agree Your Hoof Rasp Inspection and Packing Criteria

Provide the model or drawing and intended volume, plus the checks, carton identification and any documents you require at receiving.

Qingdao Relia Industries Co., Ltd.Shuyuan Road, Qingdao, Shandong, China[email protected]+86 18561762631WhatsApp +1 404 203 0971