Hand Saw Files by Tooth Size and Taper

The four nominal 6-inch taper files have different catalogue widths. Heavy is 12.5 mm, regular is 10.8 mm, slim is 8.5 mm and extra-slim is 7.5 mm. Choose by the gullet dimensions from the saw you service and verify the file width at the part of its taper that makes contact.

Regular tapered triangular hand saw file next to a small clean hand saw tooth specimen

Nominal 6-Inch Taper Files by Face Width

All four entries below are listed at 150 mm in their dimensional tables. The widths are catalogue values, so use the sample to measure where the saw teeth contact.

Catalogue profileListed width in the 6-inch rowBuying comparison
Heavy taper12.5 mmWidest of these four 6-inch catalogue entries
Regular taper10.8 mmGeneral hand saw profile with intermediate face width
Slim taper8.5 mmNarrower triangular section for an access check
Extra-slim taper7.5 mmSmallest listed 6-inch face in this comparison

A Heavy or Regular File for the Main Range

Compare the heavy and regular profiles if your assortment covers larger or general hand saw teeth. Check the triangular face width at the portion that will make contact, then choose the stocked length around measured access.

Heavy triangular taper file shown from the larger end at an engineering bench

Measure the Section Where the File Will Work

Measure the saw gullet and the working section of each candidate. The nominal size labels match in the table, while the face widths span 5 mm. Allow for the variation along a tapered tool and measure where contact is expected.

Saw reference
Manufacturer, model and tooth or gullet dimensions
Taper check
Face width at the working portion
Stock line
Profile, 6 in or other selected size and approved sample

Slim and Extra-Slim Choices for Small Teeth

Compare the slim taper and extra-slim taper when the regular profile is too large for the working space. Ask for measured face widths on the actual sizes. This is especially useful with small-tooth tools.

Slender true triangular extra-slim saw file in close profile against a pale maple bench

A Fine Blade File for a Backsaw Check

Our fine saw blade file is described as flat or tapered and its table lists 150 × 16 × 2.2 mm. Sample that shape independently from the four triangular taper files. Send the actual gullet and saw reference rather than substituting by length alone.

Taper file
Three faces, taper and gullet fit
Fine blade file
Actual section, edge and working clearance

A Stock Line That Preserves Fit Information

Include the saw profile and the part of the file face that meets it. A stock list should let another buyer re-order the same version from the information already recorded.

Saw reference
Model, tooth pitch or gullet measurements
Tool reference
Profile, length and width
Evidence
Fit sample or maker’s recommendation
Quantity
Pack unit and stock count

A Sample Pairing at the Workbench

Place the file beside the saw section so the contact area can be identified. Keep the image and the working-face size with the approved stock line. The next buyer gets a check they can repeat.

Fine tapered saw-blade file on a clean blue-grey bench alongside an isolated fine-tooth backsaw blade segment

Specialized Sharpening Choices by Tool

Hand saw profiles use a face-and-gullet fit check. Chain and drill maintenance take different inputs, which the dedicated file guides cover.

A Hand Saw File Assortment by Measured Size

Send the saw models, available maker references, tooth or gullet measurements and quantities. We can discuss the set of taper profiles you want to stock.