Wholesale Round Chainsaw Files by Diameter
Use the diameter specified for the complete saw-chain model. Our round chainsaw file lists metric choices of 3.2, 4.0, 4.5, 4.8, 5.0 and 5.5 mm, alongside nominal 6- and 8-inch lengths. Confirm the exact diameter and length combination on the stock line before you order.

Order Fields for Round Chainsaw Files
Start with the maker’s chain-specific equipment table. These catalogue fields help you carry that requirement through to the quote and pack.
| Order field | Current catalogue reference | Record for reorders |
|---|---|---|
| Diameter | 3.2, 4.0, 4.5, 4.8, 5.0 or 5.5 mm choices | Use the diameter specified for the exact chain reference |
| Nominal file length | 6 or 8 in listed | Confirm the supplied length for the diameter ordered |
| File type | Round, double-cut, high-carbon steel stated | Check handle or tang and guide fit separately |
| Box identification | Different diameters can look similar | Give diameter with units and separate pack quantities |
Chain Model Records for Your Range
Keep the chain brand, model reference and maker’s specified file diameter together. Carry that information forward when you evaluate a new replacement file. The source or manual version matters when two similar chain names share a stock area.

One Stock Entry for Each Chain and Diameter
Official chain manuals identify the chain model, the recommended file diameter and guide reference separately. Use the separate guide reference and adjustment data for that model. Keep your maintenance reference with the exact diameter on the stock line. See this manufacturer equipment-table example.
- Model reference
- Complete chain code and manual or revision
- File request
- Stated diameter, unit and length
- Receiving
- Compare actual reading and pack label with your approved reference
A Diameter Check on the Sample
Measure the actual cylinder at the point your purchasing team uses for acceptance. Our listing also shows 6 and 8-inch lengths. Confirm which length is ordered for the diameter and packaging you plan to receive.

From Chain Reference to Product Order
Check the chain instructions first, identify the matching file candidate, then record the test size and package identifier. Save the source in the same sheet your receiving staff use.
- Chain instructions
- Identify the requested diameter
- File sample
- Check diameter, length and guide fit
- Stock order
- Use the accepted size and pack
Stock Packaging by Diameter
Put a distinct size label on every box or pack that receives its own inventory reference. If you stock two lengths at one diameter, identify those separately as well.
- Per tool
- Diameter and length
- Per carton
- Quantity, reference and receiving label
A Packed Round File for a Spare Range
Think about how the file is stored and protected at the counter. Specify the unit pack and the number of pieces per carton on your quote, particularly if you order several size lines at once.

Different Orders for Hand Saws and Chains
Carry the maker’s unit through the purchase order and verify any second unit on the box. A vague “small round file” label is difficult to receive when the catalogue has 4.0 and 4.5 mm choices. Keep chainsaw files and triangular hand-saw files in different stock groups.
- Chain
- Diameter and model
- Hand saw
- Taper profile and gullet fit
- Mixed purchase
- itemized wholesale order
An Order List by Chain and Diameter
Send your chain models, manufacturer recommended diameters, preferred lengths and quantities. We can discuss the listed file options and quote details.