Guitar Fret Files by Stage of Work

Our fretwork tools cover three separate steps. The flat leveling file is listed for correcting uneven frets. Choose a concave, triangular or compact crown shape to fit the fret and available clearance, and add the bevel file for exposed fret ends. Ask for groove width and angle where your shop needs a specific fit.

Flat fret leveling file beside the neck of an unbranded electric guitar on a muted warm luthier workbench

Five Fret Tools by Stage and Contact Profile

A useful repeat order identifies the step and the tool’s working shape. The model links open the actual descriptions.

Catalogue toolListed profileSelection check
Fret leveling fileFlat, fine cutWorking-face length, width and flatness
Concave crown fileConcave, fineCompare actual groove opening with the fret wire
Triangular crown fileTriangular, fine cutCheck the edge and clearance at the fret
Compact crown fileConcave or rounded, compactCheck reach around the body and fretboard
Fret chamfer fileBevel or angled, fine cutConfirm the fitted end angle and protection of adjacent surfaces

A Flat File for the Leveling Stage

Our flat leveling model is listed for correcting uneven frets. Ask for the working face length and width, and compare straightness on the sample. The tool needs to sit in the planned working area while your team carries out the job.

Close low-angle view of a true flat fret file supported next to a strip of mounted fret wire on a plain wooden bench

Three Crowning Profiles to Sample

The concave crown file, triangular crown file and compact crown file give you distinct choices. Match the working profile and access to the fret size your shop handles most.

Concave
Check groove width and contact
Triangular
Check the section and clearance along the fret
Compact
Check tight space near the body

Crowning Access Near the Body

A compact tool can be useful where the handle or working face needs room near the guitar body. Compare the working slot and the clearance of the sample against one of the actual instruments you repair.

Compact fret crowning file resting by the upper fretboard near the body of an unbranded guitar

A Fret Profile Record for Shared Workbenches

Measure actual fret width and height before comparing a concave or rounded file. Note the access at a representative location near the instrument body. Keep the selected tool with the measurement and the final contact review, so multiple shops can order the same set.

Fret dimensions
Width, height and type of wire
Access
Position and clearance along the neck
Approval
Tool, contact observed and finish accepted

A Dedicated Tool for Fret Ends

Our fret end chamfer file covers a separate kit role. Confirm the bevel angle, working length and tool contact from a sample. Keep it on its own replacement line when you order for multiple workstations.

Crowning
The profile across the fret
End treatment
Clearance, bevel and protection beside the ends

A Bevel Tool for the End of the Fret

A side view from the end of the fretboard shows the space and angle the tool needs to reach. Add the sample image to the quote sheet if your technicians work on several different neck profiles.

Actual fret chamfer file beside an unbranded fretboard edge

A Kit List for a Repair Team

Write separate stock lines for the leveling file, each crown profile and the end file. Groove radii, bevel angles and actual tool envelope need confirmation on the individual sample. If your order also includes nut and saddle work, use the nut and saddle file guide for the different width fields.

Choose the tasks
Level, crown and bevel
Validate fit
Record the tested fret profile
Set stock
Save individual replacement lines

A Fretwork File Kit Quote

Send fret widths, intended tasks, clearance limits and quantities by workstation. We can compare the catalogue files using that information.