Guitar and Bass Files for Nut Slots and Saddle Seating
Use the string gauge of the actual set you service to choose a nut file. Our guitar and bass nut files give individual paired blade values by set code. The nut seating file and saddle slot file support different jobs. Measure the existing groove or bridge-seat width before using either.

Blade Gauge Sets by Instrument
The catalogue gives the following blade pairs in inches. Compare your actual string list to each individual blade and use the instrument label as an additional reference.
| Instrument and catalogue code | Listed paired blade sizes in inches | Selection check |
|---|---|---|
| Acoustic 0651-100-A | .016 / .042, .026 / .050, .036 / .055 | Match the exact acoustic string set used by your shop |
| Acoustic 0651-XZ1-AG-XR | .012 / .032, .016 / .042, .024 / .054 | Different blade pairing for another acoustic stock line |
| Electric 0651-100-EG | .010 / .026, .013 / .036, .017 / .046 | Compare each position in the electric string set |
| Classical 0651-XZ1-C-XR | .030 / .038, .032 / .042, .035 / .046 | Check actual string material, diameter and required slot |
| Bass 0651-100-EB | .045 / .085, .065 / .105, .075 / .130 | List the actual bass gauge and approved tool code |
Nut Blades Chosen for Your String Range
Make a string-gauge list for the instruments you handle and separate the sets by type. Confirm the blade thicknesses and pieces supplied in the exact set you quote. Keep the gauge list with the order for all your locations.

Existing Slot Work and New Gauge Selection
Check whether the work is the bottom of an existing nut slot or the saddle seat in the bridge. The catalogue describes a flat or profiled nut seating file and a flat slot saddle file. Get the measured contact section before approving the tool against the existing instrument geometry.
- New string slot
- Match each required blade gauge
- Nut seating
- Existing slot width and bottom profile
- Saddle seat
- Bridge slot width, depth and tool clearance
A Nut Seating File for Existing Slots
Our nut seating file is listed for flattening string slot bottoms. Check the actual working section against the existing slot. Send a marked drawing or measured picture with the configuration you want to compare.

A Saddle Slot File for the Bridge Seat
Our guitar saddle slot file is listed for acoustic and electric guitar setup. Compare its working face with the actual saddle seating width and access before placing an order.
- Nut seating
- Confirm the existing string slot and bottom
- Saddle seating
- Confirm the bridge slot and tool clearance
A Reference Sheet for a Repair Chain
Keep a per-instrument gauge record. Choose a basic set for common work and a separate order line for specialty seating tools. Save any dimensions and trial outcomes so other locations can match your selection.
- Name the instrument
- String gauges and job type
- Check the blade
- Thickness and fit on the sample
- Set stock
- Retain the approved set and seat tools
A Saddle Tool with the Seat in View
Use a side view of the slot and sample file to clarify the relevant contact surface. The photo and the ordered dimensions make it easier to approve a repeat request later.

Related Fretwork Tools for the Same Workshop
A repair chain can use one approved set reference per string pack and a separate line for each seating tool. Save a copy of the supplier table with the order. Ask for any alternative gauges or working dimensions separately so the order code and actual blades stay aligned.
- Fretwork
- guitar fret file kit selection
- String work
- Nut sets matched to actual gauges
- Seat work
- Specific slot and working face
A Nut and Saddle File Quote by Size
Send the instrument type, usual string gauges, existing slot measurements and set quantities. We can review the catalogue codes and file shapes with you.